Get A Quote

0.4Mpa Low Pressure Screw Air Compressor

55v-2jpg
55v-1jpg
55v-4jpg
55v-3jpg
55v-2jpg 55v-1jpg 55v-4jpg 55v-3jpg

0.4Mpa Low Pressure Screw Air Compressor

The low-pressure screw air compressor can be configured according to the user’s air pressure, using very little energy to meet your process system flow, saving a lot of energy, and the manufacturing cost of your products will be significantly improved. For example, the air supply requirement in your process system only requires 3bar pressure, and the air compressor used is configured with 7bar, and then decompressed to 3bar. You will spend twice as much electricity to meet your process needs, you can choose our low pressure screw air compressor, you can pay half the electricity bill.

  • The host specially designed based on low voltage has lower power consumption and more energy saving.
  • There is no frequent loading and unloading, the motor has a longer service life, and the parts are over 15 years old
  • Increase the processing capacity of oil separation barrels and oil separation cores to ensure that the oil content is lower than 2PPM
  • Permanent magnet motor has high energy efficiency and long service life
  • High rotation efficiency without gears and couplings
Request a Quick Quote
Description
Technical Data
More Details
Contact Us Now
Description
  1. It is made of small motor, big head and low speed, so the noise of the compressor is low. The screw air compressor generally adopts the star-delta step-down starting method. If necessary, soft starting and variable frequency starting can be used, so the starting current is relatively low.
  2. In the continuous compression of the screw machine, there is no pulse in the airflow of the compressed air, and the airflow is quite stable. Whether it is a new investment or replacing the existing screw air compressor with an exhaust pressure of 0.7-0.8Mpa, the low-pressure screw air compressor can save you more than 30% in electricity bills.
  3. High reliability, low noise, while reducing carbon emissions and saving energy. To reduce production costs, the gas output is more than 10% larger than that of the piston type under the same power. This 10% is basically negligible for small factories, but 10% is already quite high for large factories.

Technical Data
Single-stage low-pressure screw air compressor  
Model Working pressure Capacity Power Noise Air outlet
pipe
diameter		 Net weight Dimensions(mm)  
Mpa m3/min kW hp dB kg Length Width Height  
SLTL-22S 0.3 6.31 22 30 62±3 DN50 1330 1415 1030 1330  
0.4 6.29 22 30 62±3 DN50 1330 1415 1030 1330  
0.5 6.18 22 30 62±3 DN50 1330 1415 1030 1330  
SLTL-37S 0.3 9.28 37 50 65±3 DN65 1420 1900 1200 1650  
0.4 9.27 37 50 65±3 DN65 1420 1900 1200 1650  
0.5 9.24 37 50 65±3 DN65 1420 1900 1200 1650  
SLTL-55S 0.3 15.07 55 75 68±3 DN80 2100 2160 1500 1750  
0.4 14.82 55 75 68±3 DN80 2100 2160 1500 1750  
0.5 12.8 55 75 68±3 DN80 2100 2160 1500 1750  
SLTL-75S 0.3 19.27 75 100 68±3 DN125 2700 2900 1830 2000  
0.4 19.24 75 100 68±3 DN125 2700 2900 1830 2000  
0.5 14.63 75 100 68±3 DN125 2700 2900 1830 2000  
SLTL-90S 0.3 22.25 90 120 73±3 DN125 3800 2900 1830 2000  
0.4 22.03 90 120 73±3 DN125 3800 2900 1830 2000  
0.5 19.21 90 120 73±3 DN125 3800 2900 1830 2000  
SLTL-110S 0.3 30.81 110 150 74±3 DN125 4000 2900 1830 2000  
0.4 24.52 110 150 74±3 DN125 4000 2900 1830 2000  
0.5 24.39 110 150 74±3 DN125 4000 2900 1830 2000  
SLTL-132S 0.3 30.93 132 175 76±3 DN125 4800 2900 1830 2000  
0.4 30.72 132 175 76±3 DN125 4800 2900 1830 2000  
0.5 30.58 132 175 76±3 DN125 4800 2900 1830 2000  
SLTL-160S 0.3 40.8 160 215 76±3 DN150 4800 3400 2050 2250  
0.4 40.4 160 215 76±3 DN150 4800 3400 2050 2250  
0.5 39.8 160 215 76±3 DN150 4800 3400 2050 2250  
More Details

30% compared with the normal pressure unit of the same power, and reduces the power consumption by more than 25% under low-pressure conditions.

  1. Oil and gas separation system, special oil and gas separator for low pressure machine, 30% larger than that of atmospheric pressure machine, air oil content ≤ 2ppm, high recovery and recycling of lubricating oil, effectively avoiding the phenomenon of flying oil
  2. Ultra-large oil-water separation. The condensed water separation efficiency is increased by 30%, reducing the possibility of the customer's post-processing equipment and gas pipeline being corroded by water vapor
  3. Adjustable minimum pressure valve, specially designed for low pressure screw unit, the pressure drop is only 0.01bar
  4. In the cooling system, the cooling fan is placed independently and is not connected to the cooler, which greatly reduces the risk of leakage of the cooler due to long-term vibration of the fan, and also greatly facilitates the cleaning and maintenance of the cooler.

Contact Us Now

Contact Us For A Quick Quote

Full 0.4Mpa Low Pressure Screw Air Compressor Support

Design Support

Email Support

Packaging Solutions

0.4Mpa Low Pressure Screw Air Compressor

Contact Us Now

Low Pressure Screw Air Compressor Manufacturer in China

Sollant is a professional company specializing in the sales, operation and maintenance of compressed air systems and energy-saving services. It is committed to providing users with stable, high-quality and low-cost compressed air. Provide product and service support for machinery, metallurgy, power generation, textile, chemical industry and other industries! After years of development, the company has a group of professional and technical personnel of air compression fluid equipment and rich experience in on-site engineering management, which can provide users with a full range of technical service support.

0.4Mpa Low Pressure Screw Air Compressor

45KW Low Pressure Screw Air Compressor

132KW Low Pressure Screw Air Compressor