Specially designed and manufactured for cement, chemical fiber, glass, petroleum, electronics, food, pharmaceuticals, textiles, printing and dyeing, ceramics, surveying, mapping and exploration and other industries that require high gas volume and low pressure (3-5bar) Low pressure screw air compressors that require low pressure air
The low-pressure screw host specially developed for low-pressure applications increases the flow rate by more than 30% compared with the normal pressure unit of the same power, and reduces the power consumption by more than 25% under low-pressure conditions.
The low-voltage screw air compressor generally adopts the star-delta step-down starting method. If necessary, soft starting and variable frequency starting can be used, so the starting current is relatively low. The low-pressure screw air compressor is manufactured with a small motor, a large head and a low speed, so the noise of the compressor is small.
In the continuous compression of the screw machine, there is no pulse in the airflow of the compressed air, and the airflow is quite stable. High reliability, low noise, while reducing carbon emissions and saving energy. Reduce the production cost, and the gas output is more than 10% larger than that of the piston type under the same power.
A strong after-sales team, no matter where you are, we will provide you with the best service in the shortest possible time. The professional product design team of the main engine factory can provide according to specific requirements, gas consumption, pressure, accessories matching, environmental location, etc. Overall solution. Regular inspections, regular after-sales maintenance, and one-stop service make you more worry-free. All products have passed the ISO9001 quality system certification and national inspection standards. The products are connected by seamless hard pipes, which refuse to leak oil. The mainframes are specially designed based on chemical fiber texturing machines, textiles and other industries. The service life of the parts of the low-voltage machine is over 15 years, and the power consumption of the whole machine is lower and more energy-saving.
There are many uses of low pressure air compressors, mainly in the glass industry, cotton spinning, chemical fiber industry, cement industry, and water treatment industry. The pressure required by these industries is relatively low, which cannot be satisfied by ordinary air compressors. This requires the air compressor to be equipped with a pressure reducing valve, which will cause a lot of waste. Therefore, in response to this situation, our company has been very early. Began to develop this low-pressure screw air compressor, so that the output of compressed air of suitable pressure.
The advantages of SOLLANT low-pressure screw air compressors can be said to be very large. The internal use of an efficient oil and gas separation system ensures that the oil content of the air compressor is low, so that the fuel consumption is also very low. And we also have a high-efficiency main engine. The main engine is connected to the coupling of the motor, and the rotation efficiency is higher, so that the frictional resistance of the rotor rotation is smaller, and the energy consumption is also lower, so that the efficiency is higher, and the exhaust gas is reduced. The amount of electricity has been greatly increased, and our low-voltage machine can really save more than 50% of electricity bills, and the investment has been recovered in less than a year.
SOLLANT low-pressure screw air compressor is a new type of air compressor developed according to the country’s proposal to save energy and reduce emissions and protect the environment, which changes the traditional air compressor must use an elegant compressor to decompress the air discharged from the compressor. In discharge, the waste of energy is reduced.
